A canteen serves the same meal hundreds of times a day, every working day. That makes the plate a running supply decision, not a one-off purchase. This guide is for facility managers, canteen contractors and corporate caterers choosing disposable plates and meal trays for office, factory, hospital and campus canteens.
Table of Contents
Which tray or plate suits which canteen menu
Canteen menus in India are mostly a set meal: rice, roti, dal, one or two sabzis and something on the side. A compartment tray or plate keeps these apart, so the dal does not run into the roti and the tray does not get soggy in one corner. Bagasse meal trays and compartment plates cover most canteen menus:
- Full thali lunch: the 5 compartment meal tray. Rice in the large section, dal, two sabzis and curd or a sweet in the smaller ones. At 34 mm deep it holds gravy without spilling when carried to the table.
- Standard lunch with fewer items: the 3 CP meal tray or the 10 inch 3 compartment plate.
- Bigger portions or a fourth item: the 11 inch or 12 inch 4 compartment plate.
- Breakfast and snacks: the 2 CP meal tray for poha with chutney or idli with sambar, or a 9 inch round plate.
- Dal, sambar or curd on the side: 180 ml or 240 ml bowls. See our guide to bagasse bowls.
| Product | Size | Depth | Weight | Per packet | Per box | Best for |
|---|---|---|---|---|---|---|
| 2 CP Meal Tray | 200 x 130 mm | on request | 8 g | on request | on request | Breakfast, snacks with a side |
| 3 CP Meal Tray | 225 x 180 mm | on request | 13 g | on request | on request | Simple lunch: rice, dal, sabzi |
| 5 Compartment Meal Tray | 300 x 245 mm | 34 mm | 35 g | 25 | 500 | Full thali lunch |
| 10 inch 3 Compartment Plate | 250 mm | 22 mm | 19 g | 25 | 500 | Standard canteen lunch |
| 11 inch 4 Compartment Plate | 278 mm | 24.5 mm | 22 g | 25 | 500 | Lunch with a sweet or curd |
| 12 inch 4 Compartment Plate | 305 mm | 24.5 mm | 26 g | 25 | 500 | Large portions, heavy menus |
Running a canteen?
Tell us your daily covers, menu and location. We will suggest a tray or plate and quote for a monthly supply. Samples are available so your kitchen can test them with the actual menu.
How to plan a monthly canteen order
Canteens should plan by the month, not by the event. A simple way to work it out:
- Count daily covers per meal. Lunch, breakfast and evening snacks separately, since each may use a different tray.
- Multiply by working days. A canteen open six days a week runs about 26 days a month.
- Add a small buffer. About 5 percent covers spoilage and extra visitors.
- Round up to full boxes. The 5 compartment tray and the compartment plates come 500 to a box, so the maths is simple.
Example: a factory canteen serving 400 lunches a day, 26 days a month, needs about 10,400 trays plus a 5 percent buffer, so roughly 11,000 5 compartment trays, which is 22 boxes. Ordering a fixed quantity every month also means the same plate every time, which matters if you run more than one site. Our guide to standardising plates across outlets covers this.
Disposable trays vs washing steel plates
Many canteens still use steel thalis. They work, but the cost is not only the plate. Here is how the two compare in practice:
| Steel plates | Bagasse trays | |
|---|---|---|
| Upfront cost | High, bought once | Paid per meal |
| Washing | Needs staff, water, detergent and hot water after every meal | None |
| Peak-hour rush | Clean plates can run short when the queue is long | Always a fresh tray at the counter |
| Hygiene | Depends on how well each plate is washed and dried | Single use, food-grade |
| Losses | Plates go missing or get dented | Bought in the quantity you use |
| Space | Wash area, drying racks, storage | Dry store for boxes only |
Bagasse is usually the right call where water or washing staff are short, during outbreaks or audits when hygiene is under scrutiny, and in hospitals, construction sites and temporary canteens. Steel can still make sense in a small office canteen with a dedicated washing setup. Some canteens use both: steel for regular staff, bagasse for peak days, visitors and events. For one-off office events, see our guide to tableware for corporate events.
Canteens beyond the office
- Factory and plant canteens: large shifts eat in short breaks, so speed at the counter matters. Pre-stacked trays next to the serving line keep the queue moving.
- Hospital canteens and patient meals: single-use trays avoid cross-use between wards. Use deeper trays or a bowl for khichdi, dal and soups.
- College and hostel messes: high volumes and limited washing staff. Compartment plates suit a fixed mess menu.
- Construction sites and temporary canteens: often no running water or wash area at all, which makes disposable trays the practical choice.
What canteen buyers should check
- Heat and oil. Canteen food is served hot and often oily. Bagasse holds its shape under both; see our test notes on hot and oily food.
- Reheating. Bagasse trays are microwave-safe, which helps where meals are reheated for late shifts.
- Food safety. Ask for test reports. Bagasse is food-grade with no plastic lining; read is bagasse tableware safe.
- Consistency. Trays should be the same weight and thickness every month. Our list of red flags when buying bagasse plates shows what to look for in samples.
- Storage. Keep boxes dry and off the floor. Our storage guide explains how long bagasse keeps.
Compliance and sustainability reporting
Plastic plates and thermocol come under India’s single-use plastic ban, so they are not an option for a canteen that wants to stay compliant. Companies that report on sustainability can also count bagasse trays as plastic-free, made from sugarcane bagasse, a by-product of sugar production. Used trays can be composted with the canteen’s food waste where a composting arrangement exists; our composting tips explain how. Brands that put packaging on the market should also read our note on EPR compliance.
Why buy direct from the manufacturer
Pulpcraft makes every plate, bowl and tray at its own plant in Kaimur, Bihar. The plant holds BRCGS (Packaging Materials, Grade A), ISO 9001, ISO 14001, ISO 45001 and ISO 22000 certification, with SGS and CIPET test reports on the products. You can see the certificates on the About page. A canteen contract runs for months or years, so a direct supplier who makes the trays matters more than a one-time low quote. You get the same specification every month and one point of contact when volumes change. For other everyday uses, see our page on use and throw plates.
FAQs
Which tray is best for a corporate canteen lunch?
The 5 compartment meal tray for a full thali, or the 10 inch 3 compartment plate for a simpler menu of rice, dal and sabzi.
How many trays do I need a month?
Daily covers multiplied by working days, plus about 5 percent. A canteen serving 400 lunches a day for 26 days needs about 11,000 trays.
Are bagasse trays strong enough for factory canteen portions?
Yes. They hold large, hot and oily portions. For very heavy portions, use the 12 inch 4 compartment plate or the 5 compartment tray.
Can the trays be reheated in a microwave?
Yes, bagasse trays can be used for reheating in a microwave.
Do you supply canteens on a monthly schedule?
Contact us with your monthly volume and location, and we will quote for a regular supply.
Can we use both steel plates and bagasse trays?
Yes. Many canteens keep steel for daily staff and use bagasse for peak days, visitors, events and temporary sites.
Get a monthly quote for your canteen
Send your daily covers and menu, or call us to talk through tray sizes and supply.


